MACHINE LIST

Roger Sanderson, President

(562) 432-6826

ONE Miller Aerowave 350 AMP Tig Welder
Controllable plus and sync wave welding machine for greater accuracy in welding thin materials

TWO Miller Syncrowave 375 AMP Tig Welders
Precision aircraft welding on light gauge material such as aluminum, stainless steel, and titanium

TWO Miller Syncrowave 250 AMP Tig Welders
Tube welding or plate welding up to 1?4 inch wall thickness

ONE Lincoln 450 AMP Powerwave Welder
Fully programmable automatic welding machine for capacity up to 1 inch thick aluminum plate

ONE Cobramatic Hobart 300 AMP Welder
Capable of welding aluminum plate 0-2 inches thick at 3-feet a minute

ONE Lincoln 250 AMP Wire Feed Welder
Capable of welding 1?4 inch through 1?2 inch thick production steel

TWO Milleramatic 35 AMP Wire Feed Mig Welders
Capable of welding 1/16 inch through 3 inch thick parts, tabs, brackets and plate in production

ONE Lincoln DLX 300 AMP Diesel (quiet) Mobile Welder
Tig welding, outer shield welding, aluminum mig welding or arc welding
Tig leads capable to go 225-feet from truck

ONE 16 Inch Sheet Metal Spot Welder
Capable of spot welding sheet metal, boxes, panels or skinning of doors

ONE Walker Turner 42 Inch Throat Drill Press 3 HP Variable Speed
Capable of drilling holes in center of large sheets of metal

TWO Walker Turner Double Headed Drill Presses 1 HP Variable Speed
Production drilling of holes

TWO Buffalo Drill Presses .5 HP Variable Speed
Production drilling of holes

ONE Delta Floor Drill Presses 2 HP
Slow speed drilling of large holes

THREE Floor Drill Presses .5 HP
Capable of drilling and tapping small holes

ONE Plasma Cutter PAC 5 x R
Capable of precision cutting steel and stainless steel parts from 0 to 1?2 inch thickness

ONE Plasma Cutter PAC 44
Cuts steel and stainless steel parts from 1?2 inch to 4 inch thickness

ONE Esab Panagraph 4 x 8 Foot Table
Capable of holding up to five at a time machine plasma cutting torches or victor gas cutting torches while a camera eye traces a drawing

THREE Victor Flame Cutting Machines
Capable of cutting straight lines or large diameter circles

SEVEN Milwaukee Portabands
Cuts and miters pipe and tubing up to 6 inches in diameter

ONE Brobo 14 Inch Cold Saw
Cuts and miters tubing and bar stock up to 4 inches in diameter

ONE HE&M Automatic Band Saw Capacity of 18 x 19 Inches 7.5 HP
Fully programmable saw with miter capability of 45 degrees in each direction, tolerance .003 accuracy 1/10 of 1 degree on mitering

ONE 20 Inch Throat 12 Foot Band Saw
Capable of cutting steel and aluminum plate

ONE Lathe 13 x 42 Inches 7.5 HP (Clausing)
Precision machining of shafts and round objects, drilling and boring of holes

ONE Lathe 18 x 96 Inches 7.5 HP
Machines large shafts

ONE Crowning Machine (3/4, 7/8 and 1 Inch)
Crowning and rolling of large radius tubing and bar stalk

ONE Vertical Floor Mill 2 HP
Precision machine work

ONE 40 Ton Ironworker
Punches 1/8 to 1-3/8 inch holes in sheet metal up to a 1?2 inch plate

ONE 40 Ton Plate Shear
Shears up to 1?2 inch steel plate up to 14 inch in length

ONE 4 Foot 14 Inch Gauge Sheet Metal Shear
Shears aluminum and steel up to 4 feet long and up to 14 inches

ONE Amada 8 Foot ¼ Inch Gauge Sheet Metal Shear
Shears aluminum and steel up to 10 feet long and up to 1?4 inch capacity

ONE 36 Ince 3 Inch Sheet Metal Roller
Rolls sheet to make tubing and curved objects up to 1/8 inch thick and 8 to 10 inches in diameter

ONE 2 Inch Sheet Metal Roller
Capacity to roll sheet into cylinders and cones down to 2 inches in diameter

ONE 1 Inch Sheet Metal Roller
Capacity to roll sheet into cylinders and cones down to 1 inch in diameter

ONE Hydraulic Tube Bender To 2 Inch Capacity Solid
Bends and forms solid round and flat bar stalk and tubing to any shape desired

ONE 2 Foot Finger Break
Bends and folds sheet metal from 28 to 11 gauge and 2 inches in length

TWO 4 Foot Box And Pan Break
Bends sheet metal from 28 to 14 gauge and up to 4 inches in length

ONE Promecam 10 Foot Hydraulic Break 140 Ton Capacity
Bends and folds steel and aluminum up to 1?4 inch capacity and 10 feet long

ONE 6 Inch Pedestal Grinder
Sharpens tools and cutters

ONE 60 Inch by 2 ½ Inch Burr King Belt Sander
Deburrs parts

ONE 2 Inch Wide Burr King Belt Sander 2 HP
Deburrs small parts

ONE 20 Inch Apex Disk Sander 3 HP
Grinds and sharpens parts and edges

ONE Enerpack Fastening System
Capable of hydraulically swedging threaded inserts up to 3?4 inch diameter

THREE Various Sized Phnumatic Riveting Equipment
1/8 inch, 3/32 inch, 3/36 inch, and 1/4 inch capacity rivets

TWO Rockwell ¼ Inch Plate Nibblers
Notches steel and stainless steel plate up to 1/4 inch capacity

NUMEROUS Body Grinders, Sanders, Drilling Equipment, Hand Tools, Taps, Dyes, Etc. (Back toTop)